P7202
Wi-Fi 7 BE5100 Ultra-Thin Wall Plate Access Point
Product accessories:
Product Description
Product parameters
Advantages introduction
Related downloads
- High-Performance Dual-Band Wireless
Compatible with both the 2.4GHz and 5GHz bands and built on Wi-Fi 7 with 160MHz bandwidth, the device delivers up to 688Mbps on 2.4GHz and 2882Mbps on 5GHz, with a peak aggregate rate of 3600Mbps. It prioritizes the cleaner, wider 5GHz band for clients, ensuring a fast and smooth wireless experience.
- 2.5G Uplink for Ultra-Gigabit Networking
The 2.5G uplink unlocks the potential of 3000M high-speed wireless. It breaks through the gigabit bottleneck to build ultra-gigabit networks and comprehensively improves wired transmission rates.
- Innovative Five-Antenna Design for Fuller Coverage
The AP innovatively adopts a five-antenna design with one extra 5GHz antenna for stronger 5GHz coverage and smoother connections. It effectively eliminates the coverage blind spots of dual-antenna designs and achieves true 360-degree omnidirectional Wi-Fi coverage.
- Array Antenna Design for Precise Coverage
The built-in five antennas use an array design for precise client coverage. It reduces channel interference, improves signal quality and stability, and provides a smooth wireless experience.
- Anti-Interference Shielding for a More Stable Network
The ceiling AP has a built-in anti-interference shield that effectively reduces wireless interference from the surrounding environment, keeping the network stable and client access smooth.
- Double-Sided Toothed Large-Area Heat Sink
The built-in double-sided toothed large-area heat sink improves heat dissipation efficiency by 20%, so speed is no longer affected by high temperatures and there is no need to worry about degraded signals or slower networks.
- High-Performance Dual-Core CPU
An ARM Cortex-A53 dual-core 2.0 GHz high-performance, low-power multi-core processor improves performance by 30%, supporting more device access without lag.
- Chip-Level Hardware Acceleration
The built-in chip-level hardware acceleration scheme delivers higher speed and stronger throughput while reducing CPU load for more stable operation.
- FAT/FIT Integrated AP Mode
Adopting a FAT/FIT integrated architecture, the device ships with software supporting both modes. Users can easily switch modes through the Web UI and flexibly choose FAT or FIT deployment according to the network environment, achieving high flexibility and adaptability in network configuration.
- 802.11k/v/r Smart Roaming
Supporting 802.11k/v/r, the AP optimizes the roaming experience, reduces roaming latency, enhances post-roaming signal quality, and speeds up client handover to ensure data continuity. An intelligent network adjustment mechanism dynamically optimizes the configuration for seamless, high-speed connectivity.
- Load Balancing in High-Density Environments
For high-density scenarios such as meeting rooms, bars and KTVs, the AP allows a custom limit on the number of clients. This prevents clients from concentrating on a single AP while other APs sit idle, truly making high density worry-free.
- Cross-Layer 3 Networking
Supporting DHCP Option 43 onboarding, the device lets users move freely across scenarios while maintaining continuous connectivity. When moving between floors covered by the network, connections switch seamlessly so business activities are unaffected, delivering uninterrupted service.
- Better and More Stable Signal
A single AP supports up to 100 clients at full load. In high-density deployment and heavy-access scenarios, Wi-Fi 7 significantly improves spectrum utilization and anti-interference performance. Compared with Wi-Fi 5, average throughput per user is greatly improved, with throughput increase of up to 400%.
- All-New Aesthetic Appearance
The all-new design offers a more modern aesthetic, and the back adopts a through-type hollow design that increases heat-dissipation space. Combined with large-area air convection, it greatly improves heat dissipation efficiency and ensures more stable network operation.
- Multi-Port Design
Two 2.5G ports satisfy wired access and isolation requirements in specific scenarios, while improving wired transmission rates and relieving bottlenecks for high-bandwidth access.
Hardware Specifications
|
Hardware Parameters |
|
|
Interface |
Uplink: 1 x 2.5GE (PoE-powered) |
|
Wireless standard |
802.11a/n/ac/ac Wave2/ax/be and legacy 802.11b/g/n |
|
Operating band |
2.4GHz |
|
Data rate |
160MHz channel bandwidth |
|
Recommended clients |
100 |
|
Memory |
512MB |
|
Flash |
128MB |
|
Spatial streams |
5 in total: |
|
Antenna |
Built-in low-radiation omnidirectional antenna |
|
Power supply |
802.3af / 802.3at compatible PoE |
|
Power consumption |
20W or less |
|
Dimensions (mm) |
200 x 200 x 32 |
|
Installation |
Wall-mounted, desktop, ceiling |
|
Operating temperature |
0C to 40C |
|
Storage temperature |
-40C to 70C |
|
Operating humidity |
10% to 90%RH, non-condensing |
|
Storage humidity |
5% to 90%RH, non-condensing |
Software Specifications
|
Software Parameters |
|
|
SSID |
8 (4+4) |
|
Security |
SSID hiding; per-SSID encryption and VLAN attribute |
|
Client control |
Client number limit based on band |
|
Smart roaming |
802.11k/v/r |
|
MAC black/white list |
MAC-based wireless black/white list |
|
Password display |
Supported |
|
Air QoS |
Built-in intelligent flow control based on the wireless medium; automatically adjusts medium allocation to prevent abuse, guarantees bandwidth for each user and prioritizes key services |
|
Management |
Web local and remote management |
|
Cloud management |
Volans APP remote management |
P7202 is an indoor ultra-gigabit dual-band ceiling AP built by Volans on the latest Wi-Fi7 technology. It is fully compatible with 802.11a/b/g/n/ac Wave1/Wave2/ax/be, supports the full 160 MHz channel bandwidth and delivers an aggregate rate of up to 3600 Mbps, making it ideal for high-density scenarios such as enterprises, hotels, schools, restaurants and hospitals.
The AP features an all-new aesthetic design with a through-type hollow back for efficient heat dissipation, and supports desktop, wall-mounted and ceiling installation. Its five-antenna array design provides 360-degree coverage, with a recommended coverage diameter of 30 meters and up to 100 concurrent clients.
P7202 provides one 10/100/1000/2500 Mbps adaptive RJ45 port, one 2.5G SFP+ optical port, PoE and DC power input, and FAT/FIT integrated operation for flexible local AC management.Wi-Fi 7 dual-band, 3600Mbps aggregate, 160MHz bandwidth
- Five-antenna array for 360-degree coverage
- Better experience with Cooling Technology
- 2.5G uplink and 2.5G SFP+ optical port
- PoE/DC power input, FAT/FIT integrated
Related Products
online message
Online
Message
If you have any suggestions or feedback to our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.